Alloy Wires
-
Cr20Ni35（N40）Nickel-chromium heating alloys
Our company has history of over 60 years in producting stainless steel. By se electing high quality raw materials and adopting melting processes of three-phase electroslag furace+single-phase remelting furnace、 vacuum furnace、medium frequency induction furnace and electric arc fumacetvod furnace， the products are excellent in cleanliness and hom ogeneous、stable in composition.The series of Bar、wire and strip cab be provided. -
0Cr23Al5 electric Resistance Heating wire Ni-Cr 1560 Heating Wire
Resistance heating alloys are one of the main products of our company, they are classified into two categories: Fe-Cr-Al alloys and Ni-Cr alloys. These alloys are widely used in making industrial heating equipments and domestic heating appliances. All resistance heating alloys manufactured by our company are distinguished by uniform composition, high resistivity, accurate dimension, long operating life and good processability. Consumers can select the suitable grade according to different requirements. -
Thin Wide Strip for glass top hot plates
Nowadays,induction cookers and traditional light wave cookers have become main electrical stove in kitchens. Induction cookers can't continuously work on the condition of small fire, with which the electromagnetic wave harmful for people is radiated.Because of the low heat quantity applied by traditional light wave cookers,their temperature rise too slowly to fry quickly and waste too much energy. To make up for the deficiency of cooker, a new cooker product for advanced glass top hot plates has been developed at home and abroad. -
Thin Wide Strip for Gas Clean-up
Fe-Cr-Al thin wide Strip produced by our company, on aspect of alloy smelting selection, is made of high quality raw materials such as ferrite,ferrochrome,aluminum ingot,it is smelt by the double electro-slag smelting.In the design of chemical composition,through increasing Thulium element,the oxidation resistance and life span of the alloy is improved significantly. -
Locomotive Braking Resistance brands
Locomotive Braking Resistance brands are used as the braking resistors' main materials of electric locomotives,diesel locomotives,subway locomotives,high-speed trains;And the brands have perfect characteristics with high and stable resistivity,surface oxidation resistance,corrosion-resistant;Correspondingly, a better anti-vibration,creep-resistance under high temperature can well meet the needs of the electric locomotive braking Resistor. -
High-strength Invar alloy wire
Invar 36 alloy, also known as invar alloy, is used in the environment requiring very low coefficient of expansion. The Curie point of the alloy is about 230 ℃, below which the alloy is ferromagnetic and the coefficient of expansion is very low. When the temperature is higher than this temperature, the alloy has no magnetism and the coefficient of expansion increases. The alloy is mainly used for manufacturing parts with approximate constant size in the range of temperature variation, and is widely used in radio, precision instruments, instruments and other industries. -
-
-
-
-
-
Wholesale Dealers of GITANE Inconel Nickel Alloy Factory - Locomotive Braking Resistance brands – Shougang
Steel grades and Chemical composition Steel grades Chemical composition% C Si Cr Al Ni Fe Cr25Ni20Si ≤0.08 1-3 25 ≤0.5 20 allowance Cr20Ni30 ≤0.08 1-2 20 ≤0.5 30 allowance Cr20Ni35 ≤0.08 1-3 30 ≤0.5 35 allowance 1Cr13Al4 ≤0.12 ≤0.70 12-14 4.0-5.5 ≤0.6 allowance 0Cr19Al3 ≤0.055 ≤0.07 18-20 3.2-4.2 ≤0.6 allowance Specifications thickness:0.3-2.0mm width:20-300mm Applies Locomotive Braking Resistance brands are used as the braking resistors’...